Monday, February 29, 2016

How to Remove 4 Common Carpet Stains

  • allow it to release from the carpet fibers. Try one of these oils to get the gum off your carpets:
  • Eucalyptus Oil
  • Olive Oil
  • Peanut Butter
  • Apply oil to the gum with a cloth. Do not pour the oil directly on the gum; it is much easier to control where you are applying the oil when it is placed on a cleaning cloth first. Saturate the gum wad with oil by repeatedly applying oil with the cleaning cloth.
  • Scrape the gum off gently using a butter knife. Gently lift the gum off the carpet by scraping a knife over the gum in the same direction each time. Wipe the gum off the knife blade after each pass to avoid re-applying the gum to the carpet. Rubbing back and forth may damage the carpet fibers and cause more damage to your flooring.
  • Clean the area with dish soap and water. Once the gum has been removed there may be some residual oils left from the cleaning process. Mix a teaspoon of a grease fighting dish soap with a quart of water and scrub the carpet with a cloth dipped in the soapy solution. Source: WikiHow

 

We hope that this post helped you learn about carpet stain removals. For more information please contact us.

 

Contact:

 

Curlys Carpet Repair

Vancouver

1255 Comox Street

Vancouver, BC V6E 1K6

Canada

Phone: (604) 282-6630

 

Bellingham

1206 Jefferson St

Bellingham, WA 98225

United States (US) Phone: 360-303-6462

The post How to Remove 4 Common Carpet Stains appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair http://ift.tt/1Ls35Ur

Photo recap from the Quirk’s Event 2016!

We are all back in the office after a busy week hosting the Quirk’s Event in New York and are enjoying re-reading all of your tweets and looking at all of the conference photos. While you can still join in on the #QuirksEvent conversation, we wanted to share a few of our favorite photos from the event that didn’t make it on our Twitter feed.

IMG_5597 IMG_5569 IMG_5572 IMG_5558 IMG_3941 IMG_5599

You can also check out a live recording from The Rockin’ Researchers playing together for the first time (with no rehearsal) at the MR Musical Jam Session, presented by Beta Research Corporation at Brooklyn’s Hill Country – Barbecue, Market:

A big thank-you to everyone who made it out to the second annual Quirk’s Event and participated in the conference! We are so grateful to the exhibitors, attendees, sponsors, speakers and partners. We cannot wait to see you in 2017!

CcEmsPmUkAEjbL1



from Quirks Marketing Research Review Blog http://ift.tt/1TNfDbC

3 Benefits of Lithium Ion Batteries

Lithium-ion becomes the fastest growing batteries available across a wide range of golf carts and electric vehicles. In this short post we’ll discuss 3 benefits of lithium ion batteries, including: high energy density, longevity and low rate self-discharge.

High Energy Density

The energy density of lithium-ion is typically twice that of the standard nickel-cadmium. There is potential for higher energy densities. The load characteristics are reasonably good and behave similarly to nickel-cadmium in terms of discharge. The high cell voltage of 3.6 volts allows battery pack designs with only one cell. Most of today’s mobile phones run on a single cell. A nickel-based pack would require three 1.2-volt cells connected in series.Source: http://ift.tt/1x510lD

Longevity

Longevity is the main advantage and thus greater value for money. While lead-acid batteries usually last between 12 and 18 months, our lithium products have a five-year limited warranty. Lead-acid batteries often deteriorate rapidly and are vulnerable to temperature fluctuations, especially during the winter. It’s realistic to estimate that a lead-acid battery may only deliver one season of regular golf. In contrast, Motocaddy lithiums are protected by an integrated Battery Management System and designed to handle at least five years of golf, irrespective of temperature and downtime. Source: http://ift.tt/1QGPRPA

Low Rate of Self-discharge

One issue with batteries and cells is that they lose their charge over time. This self-discharge can be a major issue. One advantage of lithium ion cells is that their rate of self-discharge is much lower than that of other rechargeable cells such as Ni-Cad and NiMH forms. Source: http://ift.tt/1UuqBSJ

For more information about Lithium-ion golf cart batteries, chargers or battery maintenance systems, please give us a call or contact us here.

Contact:

Recreation Sport Carts
7191 Progress Way
Delta, BC V4G 1K8
604-940-6236

 

 

 

 

 

 

 

 




from rsccustomgolfcartsblog http://ift.tt/1QGPUec

Friday, February 26, 2016

Winners - Challenge #181 Anything Goes

Hi everyone! Happy Friday.

We are back to announce our winners of our last challenge which was Anything Goes. Thank you for your amazing entries!

Here are our

HONOURABLE ADDICTS




Congratulations to you ladies! Please grab your badge to display on your blog.


Our

TOP ADDICT


and the winner of the prize from



Congratulations! What a gorgeous card! Please grab your badge to display on your blog and contact Hayley at hayleyspapergarden@gmail.com within 5 days to claim your prize.


Our current challenge is 



and we hope to see you there :)


from Addicted to Stamps and More! http://ift.tt/1QjPgnV

Thursday, February 25, 2016

Chinese consumers represent an opportunity for the Australian wine industry

A three-year study by the University of South Australia’s Ehrenberg-Bass Institute for Marketing Science funded by Wine Australia is nearing completion and has found the number of people buying imported wine in China and their frequency of consumption was on the rise.

wine Larry Lockshin, professor of wine marketing at Ehrenberg-Bass, leads research into marketing related to consumer choice, packaging and retailing, and is an acknowledged specialist in all aspects of the Australian and global wine business.

He said the surprising growing off-premise trend represented an opportunity for the Australian wine industry.

“It was assumed when we started this project that on premise, especially western restaurants in China, would be the driving force behind wine consumption but what we’ve seen over the survey is that more wine is being consumed off-premise, which means people are buying it online, in wine shops and to some degree grocery stores than the last few years,” Lockshin said. “People are moving from wine as purely a drink for formal occasions where eight or 10 people would share a bottle by having a ‘little teeny glass’ each at a special occasion like a wedding or business function. Then the occasions started to become less formal.”

The Australian wine industry needs to ask itself ‘what kind of retail channels are going to access that growing trend. Lockshin said the opportunity was there but it’s not going to be a pot of gold without work.

“Build your brand, build it slowly, sustainably, know who you are selling to, pay attention to your labeling and pricing, spend some time to make it work,” he said.

The Wine Australia Export Report December 2015 shows that the value of Australian wine exports jumped 14 percent to $2.1 billion in 2015, reaching its highest growth in value since October 2007. South Australia is the biggest wine producing state in Australia, accounting for almost half of total production.

The strongest growth was in China, Australia’s third biggest export market behind the U.S. and U.K., which grew 66 per cent to $370 million.

The University of South Australia study includes six surveys of Chinese buyers of imported wines conducted over the three-year span of the project.

The latest survey results – the fifth of the six – found 52 percent said they drank wine at home for a relaxing drink once a week or more often, 46 percent said they consumed wine once a week or more often with an informal meal at home, while more than half the people in the most recent survey drank wine at special occasions at least once every two months.

Justin Cohen, a postdoctoral research fellow in wine marketing at the University of South Australia, who has made several trips to China during the project, said wine had shifted from being just a special occasion experience to being a more everyday product.

“Frequency of consumption is rising rapidly for people consuming wine off-premise, even three years ago that wasn’t a major thing people were saying when asked why they were buying wine,” Cohen said.

“One of the things that we’re starting to counsel wine brands about is if you make your product all about special occasions, that limits you entering the head-space of a potential consumer,” Cohen said. “But if you’re also saying ‘we’re an approachable product from Australia, we’re a clean, green, safe place with a great lifestyle’ then you’re probably more likely to enter the consideration set for purchase occasions that happen more frequently.”

Cohen said Australian wine brands were doing a good job of educating people in China about their wine but they needed to shift their focus from the sommeliers and masters of wine to the uninitiated. “I think one of the challenges is before we start getting into this whole idea of ‘what do we want to communicate about Australian wine’ we have to make sure that people have even heard of us – there’s people that don’t even know that we exist,” Cohen said.

And while France is dominant, the Chinese actually have a very large domestic industry – four out of five bottles of wine sold in China are produced there.

 

 



from Quirks Marketing Research Review Blog http://ift.tt/1LHNTgx

Wednesday, February 24, 2016

Why You’re Starving: How to Avoid The Dark Side of Freelancing

Avoid the Dark Side of Freelance WritingWriters become freelancers for many reasons. Often, it’s the freedom to set our own schedule, a desire to be our own boss, wanting to earn more than a low-paid job offers, or maybe to be home with our young children.

Freelancing is a wonderful way to live and work, but few people tell you about the dark side — namely, struggling with the ups and downs of freelancer income.

Today’s post is a brief Q&A with Dianna Huff, author of Cash Flow for Freelancers. Dianna started out as a B2B freelance copywriter in 1998 and has since transitioned into marketing consulting. She wrote Cash Flow based on the strategies she taught herself to better manage her own variable income.

Carol Tice: Dianna, what do you mean by freelance cash flow? Also, explain how freelance income is different from earning a paycheck.

Dianna Huff: Cash flow is the inflow and outflow of money through your business. The inflow of money is the result of selling your freelance writing services. The outflow is the result of paying the expenses associated with selling your services: your website, hosting, phone, PayPal fees, insurance, equipment (e.g., your laptop or desktop), and taxes, to name a few things.

When you’re an employee for a company, you receive a paycheck on a regular basis. If you’re salaried, your paycheck is the same each pay period. Receiving a steady paycheck makes it easier to budget and pay your expenses.

All of this changes when you’re a freelancer. As a freelancer, your income is variable, both in terms of when cash arrives in the form of client payments and how much of it you earn each month. One month you can earn relatively high income, and the next month very low income. Adding to the variability is stuff that’s out of your control: projects that get delayed or cancelled, or a client who pays late.

Income variability is why cash flow is tough for freelancers. You have to juggle paying your business and your personal expenses against your up-and-down cash flow.

Tice: You hit on a point that not many freelancers understand — the time period between when you begin a project and when you receive final payment. Can you elaborate?

Huff: When I decided to figure out why I was struggling with my own cash flow, I analyzed all of my projects for the previous 12 months on the basis of when I received the initial deposit and when I was received final payment. That’s when I realized that this time period was 60, 90, even 120 days. A few projects had even taken six months! When I saw that, my reaction was, “O-M-G! No wonder I’m struggling.”

So, that’s one reason a freelancer may have cash flow struggles — the time period between getting a deposit and getting final payment can be very long. And the time period between invoicing for a project and getting paid for it can be long, too.

Tice: Besides saving more and doing more marketing, what else can we do to gain more control over our cash flow?

Huff: Get a handle on the outflow of cash — meaning, your expenses — in your business and your personal life. I used to have a number of cloud-based subscription services for my business. I bought all my books on iBooks or Amazon. I’d buy an app or three at the App Store. I ate out quite a bit, and on days when I was super-tired from work, I’d stop at the grocery store for wine and cheeses. I never really kept track of it all — because what’s $1.99 here, or $6.99 there, and wine and cheese I could “hide” in the grocery budget, right?

Well, all those outflows of money add up! Once I started looking at where my money was going, I got smart pretty fast. I cut cable. I cut the expensive cloud-based applications and looked for more cost-effective alternatives. I stopped buying books and now get them (and DVDs and audiobooks) from my library. I rarely buy alcohol now. I’m much more mindful of how and where I spend my money. First, being mindful means I don’t have to work so hard. And second, I spend money on what’s truly important to me — like my new bicycle. :-)

Tice: What are some other reasons freelancers struggle with cash flow?

Huff: I think the main reason is we’re not taught how to deal with variable income. Until recently, most people worked full-time jobs, which is why financial advice is geared toward people who earn steady paychecks. For example, you hear constantly to save 10% of your income.

That’s great advice if you have a steady paycheck. But for freelancers, the advice really needs to be, “Create a cash cushion you can draw on during low-income months.” If you don’t have this cash cushion, you end up using credit cards to pay expenses. And that adds cost to your business.

Another reason is that we freelancers tend to focus on the work we have today, versus planting seeds (a/k/a marketing) that will bring in work tomorrow. We get busy, we neglect our marketing, and then wake up one day to realize we have two weeks of cash — and no work.

Part of smoothing out cash flow is understanding the very real connection between marketing, sales, and income. To go back to your first question, income doesn’t drop magically into your bank account the way it did when you worked a full-time job — you have to make it happen!

What has helped you smooth out your cash flow? Tell us in the comments below.

Dianna Huff is a marketing consultant based in New Hampshire. Her new guide is Cash Flow for Freelancers. (I’ve had a good look through it, and it has some GREAT stuff, including 5 exercises for analyzing your cash flow, and 6 strategies for creating a steady(er) income.) Get the first Cash Flow exercise free, right here.

Get the FREE E-BOOK: 100+ Freelance Writing Questions Answered!

The post Why You’re Starving: How to Avoid The Dark Side of Freelancing appeared first on Make A Living Writing.



from Make A Living Writing http://ift.tt/1Qxtz2R

Tuesday, February 23, 2016

4 Types of Carpet Fibers

the invention of nylon. Triexta — polytrimethylene terephthalate (PTT) — is a polymer comprised of several monomers, including 1,3 propanediol (PDO). Because PTT and polyester (polyethylene terephthalate – PET) have the same general chemical composition, PTT was originally defined as a polyester. However, it differs so significantly from polyester that DuPont, along with Mohawk Industries, lobbied to have the differences recognized by approving a new generic name for PTT. In 2009, the U.S. Federal Trade Commission (FTC) officially recognized triexta as a new generic name for PTT, a subclass of polyester.

Basically, that means that the chemical structure of the two fibers is similar enough that triexta could not become an entire new classification of fiber (in the way that polyester or nylon is), but that PTT and PET are different enough that PTT could not simply be lumped in with PET. Triexta is recognized as being more durable and resilient than conventional polyester. The appearance of triexta is more similar to nylon than to polyester. Triexta lacks polyester’s high lustre, and more closely resembles nylon’s matte finish. Obviously, it is a matter of personal preference which look you prefer. As proven in the SmartStrand challenge, triexta is incredibly stain resistant. With simple vacuuming and ordinary hot water extraction, the carpets in the animal enclosures were restored to their original appearance. Yet another advantage to triexta is that it is significantly softer than both polyester and nylon. Its softness is due in part to the fact that it does not have topically-applied chemicals for stain protection. Even the looped berber styles, which can have a tendency to feel rough when made of nylon or olefin, feel soft to the touch and very comfortable underfoot. One of the most appealing aspects of triexta is that it is predominantly available in an environmentally-friendly version. Triexta, like all fibers, is available in various qualities and price points. However, even the entry-level qualities of triexta feature impressive warranties from the manufacturer, so overall triexta offers good value for the money. Source: About

 

Now that you know more about the various carpet fibers, you can compare similar carpets and narrow it down to the one that best meets your needs and lifestyle as well as your budget. If you’d like more information, please call us.

 

Contact:

Curlys Carpet Repair

Vancouver

1255 Comox Street

Vancouver, BC V6E 1K6

Canada

Phone: (604) 282-6630

 

Bellingham

1206 Jefferson St

Bellingham, WA 98225

United States (US)

Phone: 360-303-6462

The post 4 Types of Carpet Fibers appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair http://ift.tt/1WI1Hxv

Real Estate Negotiation Techniques 101 That’ll Save You Thousands

 

 

Are you finding yourself it hard to buy a place in this aggressive real estate market?

Are you constantly being outbid in bidding wars and tired of it?

Don’t you wish you had some inside secrets on how to negotiate like a boss?

 

In this hot market, you’re going to be engaging in wild negotiations.  Here are some basic tips that can help you when buying or selling real estate.

 

Look at the Home like a Home Inspector:

When you’re buying a property, look closely at the features of the property.  See if you can pinpoint areas that need some touch ups and repairs.  Are there chips on the floor?  How about dents, scratches and marks on the wall?  Is the place so outdated that it needs a new coat of paint? 

Find out the cost to mitigate these small problems and use that to bring the price down.

How about the age of the roof, hot water tank and the furnace?  Do these need replacing soon?  Is the flooring dirty or outdated as well?  Factor those costs in as well.

 

BATNA (Best Alternative To a Negotiated Agreement):

When you go into a negotiation, always have a BATNA.  

The post Real Estate Negotiation Techniques 101 That’ll Save You Thousands appeared first on Vancouver's #1 Family Real Estate Homes, Houses, And Condos For Sale | Gary Wong Realty.



from Vancouver's #1 Family Real Estate Homes, Houses, And Condos For Sale | Gary Wong Realty http://ift.tt/1TETLPo

3 Ways to Remove Window Dirt

Do you want to learn how to clean windows and get the same results as the professionals? Read below to learn 3 helpful ways on how to remove window dirt.

Dust
Dirty, dusty windows are a breeding ground for allergy causing dust mites. Dust is particularly prone to building up on flat surfaces such as the windowsill. Keep the windows allergy-free by regularly damp-dusting with a 5-percent bleach solution. The will rid the area of mites and mold spores, and the damp cloth will prevent the dust from flying into the air and irritating you. For extra protection, wear a dust mask when cleaning windows. Clean blinds, shutters and shades weekly with a vacuum that features a high-efficiency particulate air (HEPA) filter, and damp clean them once every three to six months. A nearly allergen-free window covering option is privacy window film. Apply this directly to the window, which gives it a frosted look. It also reduces glare and UV rays. If you must hang curtains, choose lightweight fabric that is washable. Washing the curtains in hot water every three months will keep them from building up dust mites. It can be a lot of effort, but try these allergy fighting tactics with your windows, and with luck, you can prevent many allergens from getting inside and making your miserable. Avoiding the sneezing and sniffles is definitely worth the effort. Source: BedBathAndBeyond

Remove and Prevent Mold
Begin the process of removing mold on windows by identifying every point where it exists. Examine the glass and frames of the windows thoroughly to make sure that you know where every instance of mold occurs. This makes it easier to remove it all at the same time. Do not overlook the inner surface of the window frames; open the windows and check inside thoroughly.
If, when you come to clean the mold on windows, the panes and frames are dry, begin by putting on a respiratory mask and using a vacuum cleaner to remove any loose spores. Undertake this process when the window is open to allow the particles of mold an escape route. Slowly and steadily run the nozzle of the hose over the glass and the frames, making sure you cover every section. Once complete, clean the vacuum nozzle with a cloth dampened with vinegar.
Avoid using a vacuum if the windows are wet. Instead, put on a pair of protective gloves and use a cloth that has been dampened with tepid water to wipe the panes and frames of the windows. At this stage, your action should only be to remove the excess mold on windows. Do not rub too hard so you can avoid forcing mold spores into the wood of the window frame, and regularly rinse the cloth in clean water.
Once the excess mold has been removed, you will be in a better position to determine the full extent of the problem. Where the problem is relatively minor, spray some white vinegar onto the windows and leave it for a few minutes as you gather some baking soda onto a clean cloth. This can then be used to rub away the mold since the baking soda will act as an abrasive and the vinegar will kill the spores. If the problem is more extensive, dilute some fungicide in a bucket of water according to the instructions and use this to clean the glass and frames of the windows.
After removing the mold, dry the surface thoroughly with a cloth and inspect it again to ensure that there are no final traces of mold. If so, repeat the cleaning process again.
Prevent mold from returning by keeping the windows condensation-free. This can be achieved by wiping condensation away with a dry cloth. Whenever possible, keep the nearby area ventilated so that air can circulate and prevent the window space from becoming damp. Source: DoItYourself

Avoid Streaks
Most of us don’t consider what’s in the water we use to clean. In truth, it usually doesn’t matter. But with glass, you see absolutely everything, so water content can make a difference — especially if you have hard water.
If you’re diluting your glass cleaner, consider using distilled water. It doesn’t have all the minerals in it that can be present in the water from your tap, so it won’t leave behind any streaky deposits on your bathroom mirror.
Vinegar is one of those all-purpose ingredients that’s tough to live without. It’s as great on a salad as it in on your mirror, and it costs practically nothing.
Whether you’re out of your usual glass cleaner or you’re just looking for a cheaper option, vinegar can do wonders for your windows and mirrors. A vinegar-water solution (50/50) works great — just spray or wipe it on like you would any other cleaner.
The smell will stick around for a bit, so if you gag at the scent of vinegar, you might save this streak-free cleaner for outdoor glass. You know that bucket of glass-cleaning supplies you carry through the house when it’s window day? There should not be a roll of paper towels in it. Paper towels leave not only streaks, but linty ones. Instead, go for a microfiber cloth, a squeegee, or, best yet, a handful of newspaper. Your morning read does an amazing job on glass. If you go with the newspaper, be sure to wear gloves. That ink gets everywhere.
Even if you do exactly the right things, you can still end up with a streak or three. In that case, the simplest solution is to finish the job with a quick buff. A chamois or a microfiber cloth is best, although a regular rag will do. Keep it dry, and just buff over the glass when you finish cleaning it. You’ll find those streaks just disappear.
As always, keeping up with the job makes it a whole lot easier. The less dirt and grime your windows accumulate, the less time you’ll spend cleaning them — a quick vinegar spritz, newspaper swipe and you’re on your way. Source: Home

Anything worthwhile takes patience and practice to learn. If you want to get more information about window cleaning tips, please contact us.

Contact:
Universal Blinds
601 – 1550 W. 10th Ave
Vancouver, V6J 1Z9
Canada
Phone: (604 ) 559-1988

The post 3 Ways to Remove Window Dirt appeared first on Universal Blinds, Shades & Shutters.



from Universal Blinds, Shades & Shutters http://ift.tt/1VDouu8

5 Inexpensive Ways to Make Your Bathroom Luxurious

When planning a new bathroom or updating your existing bathroom the first thing to consider is the style you want to achieve.

Read below to learn 5 inexpensive ways to make your bathroom luxurious:

Natural Accents
Natural stone counter – A soapstone top, with its river rock color and matte finish, has a warmer look than polished granite. Cut one to your specs using woodworking tools.. Source: ThisOldHouse

Two Shower Curtains For a Grander Tub
Shower curtain panels make for a far more luxurious bath experience. For a tiny bathroom, just cut the curtain in half and hem the edges. Easy peasy. Source: Buzzfeed

Arrange Artfully
Consider your counter: Are your beauty and hygiene supplies just strewn about randomly? If so, adding a few small trays can mean the difference between a mess and an artful arrangement. And don’t write off apothecary jars just because they’re a cliche — they’re a beautiful way to display the small but necessary items that often come in gaudy packaging (cotton balls, q-tips). Source: ElleDecor

Fresh Flowers and Greenery
This trick may sound too easy, but you’ll be amazed at how much a little plant life can go a long way in making your bathroom much prettier and vibrant. Source: RedbookMag

Mirror Power
A large mirror has so much power. It cuts down on tile costs by filling much of a wall (while reflecting the material you do invest in) and can virtually double the size of the room, making it feel like a vast personal oasis even if the room is a more modest size. Consider taking a mirror wall to wall. Source: Houzz

If you’d like more information on how to make your bathroom look luxurious in an inexpensive way, please contact us.

Contact:
Perfect Bath
Phone: 
Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com

The post 5 Inexpensive Ways to Make Your Bathroom Luxurious appeared first on Perfect Bath Canada.



from Perfect Bath Canada http://ift.tt/21ezCoe

Challenge #182 Make Your Mark

Good morning and happy Wednesday. We have a brand new challenge for you and it is definitely one of your favourites!




Create anything you like as long as you use something to make a mark - pencils, pens, markers, chalk, sponges etc.


Our wonderful sponsor this week is


Prize: 3 digital images (does not include designer papers)
Thank you!

Here are our Designers provided their inspiration -


(using sponsor image: Easter Basket)


(using sponsor image Cupcake with Stars)


Olesya
(using sponsor's image - Cupcake with Stars)


















Aren't they amazing! Over to you now!





'); <!-- end InLinkz script --

from Addicted to Stamps and More! http://ift.tt/1KInXXw

Monday, February 22, 2016

3 Simple Repairs to Sell Your Home Faster

Thinking about how to prepare your home properly before you put it on the market? These short post will cover 3 simple repairs to help sell your home faster. Read on!

Repair #1

Repair the Floor If your home has hardwood floors, you should seriously consider removing your carpeting and getting the floors refinished. If your sub-floor is plywood, on the other hand, transforming it into a hardwood floor will be far too costly. Rather, replace the carpeting with a neutral carpet color, such as light tan. If you have any ceramic floor tiles that are chipped or cracked, these should be replaced before putting the home on the market. Source: Hometoindy

 

Repair #2

Painting the walls in updated neutrals and on-trend colors will set your home apart and help home buyers remember each room. Open areas all should be painted the same color — maybe a light griege or muted-down color. You’ll want to skip the dark or intense colors in these areas.

Master and guest bedrooms are best painted in muted but distinct colors. Muted versions of blues, greens and yellows are good bets.

This lovely guest room painted by Warline Painting in Benjamin Moore’s Georgian Green will be remembered over a similar one painted Builder Beige.

The post 3 Simple Repairs to Sell Your Home Faster appeared first on Vancouver's #1 Family Real Estate Homes, Houses, And Condos For Sale | Gary Wong Realty.



from Vancouver's #1 Family Real Estate Homes, Houses, And Condos For Sale | Gary Wong Realty http://ift.tt/1Ujnwon

4 Simple Ways to Keep Floors Clean This Winter

Your best defense against winter causing problem for your floors is to prevent problems before they happen. This post summarizes 4 simple ways on how to keep it clean during the winter.

 

Put Doormats Inside

Some moisture is bound to get in. Keeping another doormat inside the door for wet or snowy boots is a great way to keep the moisture from tracking into your whole house.

Look around at a home goods store for hard plastic boot trays. They give you a great place to leave wet shoes to dry.  If you use a fabric or carpeted area rug, be sure that you don’t let those wet mats sit on your floor for too long. Once boots are dry enough to move, pick up wet mats and allow them to dry somewhere off the floor, if possible. SourceAngieslist

 

Deep Clean Your Carpet and Floors

I don’t know about you, but I live in Michigan and my floors get trashed in the winter. Salt collects in between every carpet fiber, and the hardwood floors take on an unpleasant whitish sheen from melting salt water. To combat this, take the time to steam clean your carpet and scrub the floors. If you don’t have a place for snowy boots and shoes, put out a couple of cookie sheets (the kind with the raised edge) for them to drain by the door. This will help keep that mess off the floors. Source: USNews

 

Prepare for Humidity Changes

As the temperature outside goes down and homes heat up, the changes in humidity can lead to gaps and separations in floor boards. The cold, dry air makes floors contract, which can leave noticeable spaces in your floors. Excessive humidity issues can lead to cupping and crowning, where the floor boards are higher at the edges than in the center (cupping) or the center is higher than the edges (crowning). In extreme situations, floors may even buckle, separating itself from the subfloor.

When dealing with humidity changes, the most important thing to remember is that floors expand and contract naturally. Having some gaps in the floor isn’t necessarily a sign of greater damage to come. Especially if you notice gaps only in the winter time, you can simply live with it and wait for the floors to get back to normal in the warmer months. If you want to be proactive during the winter season, use humidifiers and dehumidifiers to get your home at the right levels. An acceptable range for humidity would be 40-60%. Source: Bona

 

Maintenance

In a facility, a hard surface floor is the first area to be directly affected by winter weather. Snow and rain often means that ice melt, soil and moisture is most likely to be tracked in. An effective way to maintain and protect floors from these dangers is by mopping frequently with a neutral floor cleaner. The primary function of the neutral cleaner is to keep the floor clear of salt buildup and prevent damage to the actual flooring. Mopping and the use of an auto scrubber with a neutral floor cleaner is very effective in these situations because it removes grit and greasy residue left by ice melt.

It might be beneficial to bundle green ice melt products with winter floor-care products as they have less of an effect on finished floors compared to sodium chloride and calcium chloride. Source: CleanLink

 

We hope this extra attention to your floors will help to keep it clean even during the winter months. If you`d like more information, please contact us.

 

Contact:

Curlys Carpet Repair
Vancouver

1255 Comox Street

Vancouver, BC V6E 1K6

Canada

Phone: (604) 282-6630

 

Bellingham

1206 Jefferson St

Bellingham, WA 98225

United States (US)

Phone: 360-303-6462

The post 4 Simple Ways to Keep Floors Clean This Winter appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair http://ift.tt/1UjlapI

3 Tips to Save Money in Golf

The only sure rule in golf is he who has the fastest cart never has to play the bad lie.
Mickey Mantle

Golf is a game whose aim is to hit a very small ball into a even smaller hole, with weapons singularly ill-designed for the purpose.
 – Winston Churchill

Golf is a good walk spoiled.
 – Mark Twaingolf_is_cartoon

Golf can be a an expensive sport. Luckily, these tips can save you some money in golf. Read on!
Golf Balls

Balls, there I said it, let’s talk about balls, they can be really expensive so look for ones that may be cheaper than the top of the range ones. A lot of manufacturers will produce balls with company logos or for a particular event and they can have a surplus which they need to off-load at a reduced cost, so look out for excess stock clearances, they’re the same quality as the other balls but just have and different logo or name on them. You can do an internet search for ‘excess golf stock’ or ‘wholesale golf stock’ to get you started in the right direction. Some of our local places include Play it Again Sports and Replay Golf Supplies. Source: Fatwallet

Golf Practice

Golf course coupon books are best for groups of three or four players buying together who will actually use the “four for two” or “four for three” rounds. Again, these too can be quite restrictive so check the listings before you buy.

Taking golf lessons with a pro can be cheaper than green fees, will improve your skills and increase your enjoyment of the game. Golf pros can suggest proper clubs and equipment for your level/physique potentially saving you more in the long run.

Getting some swings in at a driving range is always a good way to improve your game, and relieve stress. Who doesn’t like whacking the heck out of a bucket of golf balls! Be careful to not overdo it, stretch before and after, and know your limit: two buckets MIGHT be too many swings! There are some great ranges around us, like Birdies & Buckets, Sunshine Woods, and Fraserview, so check them out! Source: Vacay.ca

 Golf Clubs

Whether you buy them in sets or individually, golf clubs can feature some pretty incredible price tags. Depending on what you’re looking for, though, you can usually save a lot of money by keeping the following tips in mind:

  • Buy used clubs: There are more used golf clubs out there than there are new clubs, so go out there and explore your options.
  • Buy demo clubs: Demo clubs are available in almost every pro shop for golfers to try out the latest and greatest golf clubs before purchasing them.
  • Don’t rent clubs: Unless your course provides free rentals, they’re probably getting away with making a lot of profit on a relatively cheap investment. Source: Golf.isport

 

Contact:

Recreation Sport Carts
604-940-6236
#3 – 7191 Progress Way
Delta, BC  V4G 1K8




from rsccustomgolfcartsblog http://ift.tt/1SNxHSz

Sunday, February 21, 2016

5 Disastrous Blog Design Mistakes — Fix These to Keep Your Readers

5 Disastrous Blog Design Mistakes - Makealivingwriting.comIf you’re here learning how to make a living as a writer, you’ve probably already got your writing skills down.

But even the most skilled writers can struggle with the design side of their blog.

Internet users are bombarded with information, and each mental transaction takes a toll on their brainpower.

Presenting content so it requires minimal effort from your audience is not just considerate — it also improves your chances that reader will subscribe and return.

What common design errors drive your blog readers away? From my experience as a user-experience expert and Web designer, these are my top five:

1. The wall of text

On the web, people don’t read. They scan. They skim the page from top to bottom in a rough F-shaped pattern, looking for meaningful cues that indicate whether a section is worth paying attention to.

The eye skims the page in a rough F-shaped pattern, looking for relevant content.

If you have a ‘wall of text’ (a body of visually uninteresting content), it camouflages those juicy key words and phrases, making it harder for readers to see that you’ve got useful information. Note the ‘wall of text’ effect in the sample at left below, compared to the more scannable section at right:

Large swaths of uniform text create a ‘wall of text’ effect (left). Add variety with colors and headings to make your content look more interesting (right).

The Fix: Add visual variety with meaningful headings, text formatting, bullet lists, links, and images. Break up your post into short paragraphs, each focused on a single, simple point. This offers readers smaller pieces of information they can easily digest.

2. Bad typography

Both the size and style of your text can affect how your content is perceived and understood. Fortunately, most pre-made blog templates take care of this, but for writers creating or configuring their own templates, a bit of typography knowledge can go a long way in making good design decisions.

The Fix: Set your body copy font size to at least 12 points (14 is better). Smaller font sizes are harder to read and take more effort, so use them sparingly or strategically. Let readers know at a glance that a piece of text is interactive by coloring and underlining your links.

Choose a familiar and visually plain font, such as Times New Roman, Georgia, Helvetica, Arial or Verdana — or one of the similar, but more stylish, alternatives such as Lato, Roboto, Lora, Proxima Nova or Adelle. Avoid overly calligraphic fonts for body copy, as they add visual clutter and reduce text legibility.

Check out the difference in readability between this handwriting-style font at left and the plain one on the right:

Ornate fonts are harder to read, especially at small sizes (left). Improve legibility and visual clarity with larger font sizes, text formatting and color (right).

If you’re going to write a heading that grabs attention, style it that way, too. Make your heading text bigger and bolder than your body copy, adding color if it suits your style.

Using a different font for headings helps them stand out, while also adding visual flair, as you see below. Be sure to choose a simple font that sends the right message to your readers.

Using a different font and color for headings makes them stand out with flair.

3. Low contrast

Content that has little visual contrast may be hard for visually impaired users to read. You want your blog to be fully accessible, so every user can read it, right? Visual contrast is one easy goal all bloggers can achieve.

Contrast refers to the difference in the color and brightness between your text and its background. Low contrast reduces legibility, demands more effort, and can even give readers eyestrain. For visually impaired people, your low-contrast content may not be visible at all.

The Fix: You can analyze and improve your contrast with a tool like this one shown below:

People with visual impairments may find it difficult to read the heading, date and tag on this blog template. Luckily, the body copy is darker, and thus more readable for some users.

Many beautiful blog templates sacrifice contrast for aesthetics. Use a color picker tool to grab the color codes for your text and background. Then, enter them into the checker to see if your content passes or if it fails to have enough contrast.

4. Poorly chosen line length and height

Would you believe line length can also affect the way people read your content? Too-long lines give readers fatigue. They may even lose their place when scanning for the start of the next line.

Too short, and readers are forced into unnatural reading rhythms and skimming patterns — another cause of fatigue. Take a look at how tiresome the top and bottom examples are here:

Various line lengths, offering different reading experiences.

The Fix: I’ve got a rule of thumb for you — the optimum length for a single line of text is between 50 to 75 characters (including spaces). If your content has too many or too few characters, it may be worth adjusting your font size to improve readability — or adjusting your template.

If that’s not enough to think about, line height also affects blog usability. Too-tall line height reduces the cohesion of your content and creates extra distance for a reader’s eye to travel. Too-short line height looks cramped and cluttered, making the brain work harder to recognize letters and retain meaningful words and phrases.

Another design rule: Aim for a line height between 120-150% of your font size. Take a look below at how cramped the 110% line height looks at the left, compared to the 145% height at right:

Line height at 110% (left) looks cramped compared to line height at 145% (right).

5. Visual clutter

As we’ve seen, adding visual variety to your blog can improve the reading experience for your audience. However, overdoing it can backfire. Research shows visual clutter negatively affects our focus by increasing the cognitive load.

Content with too much going on can be difficult to read or see, making it that much harder to absorb and understand.

Extreme example of visual clutter. You wouldn’t do this, would you? :)

The Fix: Use bold, italics, and underlines as needed to convey emphasis and provide visual cues, but use them in moderation. Too much formatting both clutters your text and dilutes your attempts to emphasize key ideas.

Look at how cluttered the example at left appears compared to the one at right:

Example of cluttered content (left) vs. tidy content (right).

As with line height, take a Goldilocks approach to the whitespace between your text and images, your headings and body copy, and where your content sits relative to the edge of its frame.

Science reveals a lot about how our brains respond to visual input. After you’ve spent time perfecting your blog post, the last thing you need is to be let down by poor presentation. Pay attention to your site’s design and layout — it’ll make your work look good, and offer a great experience for your readers.

What’s your pet peeve of bad blog design? Tell us about it in the comments below.

Sandy Lim is a former web designer, content strategist, and UX specialist who now writes, crafts, and studies homesteading. Follow her @sandysandy.

Small Blog, Big Income: Earn Money from your blog!

 

The post 5 Disastrous Blog Design Mistakes — Fix These to Keep Your Readers appeared first on Make A Living Writing.



from Make A Living Writing http://ift.tt/1XFjIO6