Monday, September 12, 2016

3 Tips on Repairing Torn Carpet

Due to everyday wear and tear, there is a high possibility that you may need to make a carpet repair at some point. To help you out, here are 3 guide tips on repairing torn carpet.

139788404_cc1a9a8687_o

Image Source: Flickr

Cut Out

Remove snags and threads from the torn area of the carpet with scissors. Cut away any threads from the carpet backing.
Measure the length and width of the tear. You’ll cut a replacement piece that is 1/2 inch longer and wider than the tear so it may tuck down into the hole. Source: SelfGrowth

Prepare the Hole

Carefully cut along the outline with a utility knife (image 1). The diameter of a standard can is a good guideline for the size of a replacement piece. The goal is to keep the cut-out area (image 2) as small as possible but still allow carpet tape to be inserted into the space and laid flat beneath the carpet backing

To ensure the carpet tape doesn’t work its way back through the opening, cut a length 2 to 3 inches wider than the diameter of the cut-out area. (Carpet tape is available in double-sided and single-sided versions; the single-sided type generally works best for this type of repair.) Peel the backing away from the adhesive side of the tape and carefully insert the piece into the cut-out area, smoothing it flat from below so that it sticks firmly to the carpet backing around the perimeter of the opening. Be patient and work carefully: handling the stickiness of the tape can be a challenge. For a cut-out this size, it generally works best to cover about half the space with one piece of tape (image 1) and use a second piece to cover the other half.  Source: DIYNetwork

Insert the Plug

Now you’re ready to fit the new plug into the hole. Pull the fibers of the surrounding carpet back from the edges. Push one side of the plug lightly onto the tape to make sure it’s set exactly right—you really only have one shot at this (Photo 5). After you’re sure the plug is placed correctly, use your fingers to work in the direction of the nap all the way around the hole as you press the plug down firmly onto each side of the tape.

A carpet tractor will do the best job of meshing the fibers, but a seam roller or even a rolling pin would work too. Place a telephone book on top of the plug overnight. Trim any fibers sticking up with a sharp scissors. You’ll be surprised how “invisible” this repair is once you’re finished. You can vacuum and clean your carpeting as you normally would, and this repair should last as long as your carpet does. Source: FamilyHandyman

 

Hopefully this article will be able to help you with repairing your torn carpet. However, if you’re thinking about hiring a professional when dealing with your carpet problem, call us now!

The post 3 Tips on Repairing Torn Carpet appeared first on Curlys Carpet Repair.



from Curlys Carpet Repair http://ift.tt/2cVghFq

No comments:

Post a Comment